संवादात्मक प्रतिरोधक
Build resistor networks and watch the meters update as you go. Because the current and voltage readings are live, you can test the series and parallel rules yourself rather than taking them on trust.
इस सिमुलेशन का उपयोग कैसे करें
- Add resistors in series or in parallel
- Set each resistance value
- Read the current and voltage at any point in the network
क्या देखें
- Current is identical at every point in a series chain
- Potential difference is identical across every parallel branch
- Two equal resistors in parallel give exactly half the resistance of one
इसके पीछे की भौतिकी
Resistors in series carry the same current and their resistances add: R = R₁ + R₂ + … Resistors in parallel share the same potential difference and their reciprocals add: 1/R = 1/R₁ + 1/R₂ + … Combined with Ohm's law V = IR, these two rules resolve almost every DC network you will meet at this level.